check_program

**This is an old revision of the document!**

This tutorial will explain 'Check Program' utility that checks the correctness of an Alphabets program through static analysis. The rules 'Check Program' uses are described in “Hierarchical Static Analysis of Structured Systems of Affine Recurrence Equations” by Dupont de Dinechin and Robert [ASAP 1996]

prog = ReadAlphabets("../../alphabets//matrix_product.ab"); CheckProgram(prog);

The main analyses performed by Check Program are described below. They exploit the algorithms for constructing domains and context domains of Alphabets expressions.

First, Check program ensures that each local or output variable has an equation, and that the variable is is defined for all points in its declared domain. In other words, each equation must ** completely** define the variable on its left-hand-side.

affine OneDTwoD {N,TMAX | N>0 && TMAX>0} given float A {i| 0<=i<=N}; returns float B {t, i| 0<=i<=N && t==TMAX-1}; using float Local {t,i | 0<=i<=N && 0<=t<TMAX}; through Local[t,i] = case {|t>0 && i==0}: Local[t-1,i]; {|t>0 && i==N}: Local[t-1,i]; {|t>0 && 0<i<N}: 0.5 * (Local[t, i-1] + Local[t-1,i+1]); esac; B[t,i] = Local[t,i]; .

In the above example, variable 'Local' is not defined over {t==0 && i >= 0}. Check Program reports this error as:

ERROR:: Variable Local is not defined over the domain : {t,i|t== 0 && N-i>= 0 && TMAX-1>= 0 && N-1>= 0 && i>= 0}

The second major property that Check Program tests is that at any point in the domain of a variable, there is a * unique* definition. This test manifests itself in many different ways, as described below.

AlphaZ ensures that there is exactly one equation for each local and output variable. It also checks if any of the input or local variable is not used in the system.

affine OneDTwoD5 {N,TMAX | N>0 && TMAX>0} given float A {i| 0<=i<=N}; returns float B {t, i| 0<=i<=N && t==TMAX-1}; using float Local {t,i | 0<=i<=N && 0<=t<TMAX}; through Local[t,i] = case {|t==0}: 0; {|t>0 && i==0}: Local[t-1,i]; {|t>0 && i==N}: Local[t-1,i]; {|t>0 && 0<i<N}: 0.5 * (Local[t, i-1] + Local[t-1,i+1]); esac; B[t,i] = Local[t,i]; B[t,i] = Local[t,i]; .

In the above example, B is defined in multiple equations and variable 'A' is not used at all. Check program prints the following messages.

ERROR:: Variable B has multiple definitions (equations) WARNING:: Variable A not used in any equation

Ensures that multiple case subexpressions do not define same point in the domain of a variable.

affine OneDTwoD2 {N,TMAX | N>0 && TMAX>0} given float A {i| 0<=i<=N}; returns float B {t, i| 0<=i<=N && t==TMAX-1}; using float Local {t,i | 0<=i<=N && 0<=t<TMAX}; through Local[t,i] = case {|t==0}: A[i]; {|t>0 && i>=0}: Local[t-1,i]; {|t>0 && i==N}: Local[t-1,i]; {|t>0 && 0<i<N}: 0.5 * (Local[t, i-1] + Local[t-1,i+1]); esac; B[t,i] = Local[t,i]; .

In the above example, variable 'Local' is defined for {i > 0} in multiple case subexpressions. Check Program reports these errors as:

ERROR:: in the case statement : ({t,i|t-1>= 0} , {t,i|-N+i== 0 && t-1>= 0}) domains of subexpressions overlap on : {t,i|-N+i== 0 && t-1>= 0} ERROR:: in the case statement : ({t,i|t-1>= 0} , {t,i|i-1>= 0 && t-1>= 0 && N-i-1>= 0}) domains of subexpressions overlap on : {t,i|i-1>= 0 && t-1>= 0 && N-i-1>= 0}

Expressions with empty domains can be the source of errors in the program.

affine OneDTwoD3 {N,TMAX | N>0 && TMAX>0} given float A {i| 0<=i<=N}; returns float B {t, i| 0<=i<=N && t==TMAX-1}; using float Local {t,i | 0<=i<=N && 0<=t<TMAX}; through Local = case {t,i|t==0}: (t,i->N+1)@ A; {t,i|t>0 && i==0}: (t,i -> t-1,i)@Local; {t,i|t>0 && i==N}: (t,i -> t-1,i)@Local; {t,i|t>0 && 0<i<N}: 0.5 * ((t,i -> t, i-1)@Local + (t,i -> t-1,i+1)@Local) + (t,i->N+1)@ A; esac; B[t,i] = Local[t,i]; .

In the above examples, domain of variable 'A' is {i| 0⇐i⇐N}, but in the equation for variable 'Local', cases {t,i|t==0} and {t,i|t>0 && 0<i<N} access A[N+1] which is not in the domain of variable 'A', thus resulting in expression with empty domain for both the cases.

WARNING:: This expression has empty domain : (t,i->N+1)@A

If any local and output variables are not defined for any values of the parameters, then they are flagged as warnings.

affine OneDTwoD4 {N,TMAX | TMAX>0} given float A {i| 0<=i<=N}; returns float B {t, i| 0<=i<=N && t==TMAX-1}; using float Local {t,i | 0<=i<=N && 0<=t<TMAX}; through Local[t,i] = case {|t==0}: A[i]; {|t>0 && i==0}: Local[t-1,i]; {|t>0 && i==N}: Local[t-1,i]; {|t>0 && 0<i<N}: 0.5 * (Local[t, i-1] + Local[t-1,i+1]); esac; B[t,i] = Local[t,i]; .

In the above example, parameter 'N' has no restrictions, but none of the variables are declared for negative values of 'N'. Check Program reports these errors as:

WARNING:: Variable Local is not defined over the domain : {|TMAX-1>= 0 && -N-1>= 0} WARNING:: Variable B is not defined over the domain : {|TMAX-1>= 0 && -N-1>= 0}

Not only declarations, but equations are also checked to ensure that they are defined for all values of parameters.

check_program.1492630303.txt.gz · Last modified: 2017/04/19 13:31 by 127.0.0.1