AlphaZ

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
=====Normalize=====
Sometimes, the expressions in an alphabets program is not written in the normal form as it is defined, which makes the program hard to read and understand. Nomalize is used to normalize the expressions in a program to the defined normal form. This page shows how to use Normalize to normalize a program.
====Usage====
The usage for the command Normalize is 
<sxh cs; gutter:true>
Normalize(Program program); 
</sxh>
The parameter program is the program you want to solve.
========
====Normalization Rules====
Normalize takes a program and applies a set of normalization rules on it. Some of the basic rules are shown below:
  - <latex> $e.f \Rightarrow e$, if $f(z)=z$</latex>
  - <latex> $(e_{1} \oplus e_{2}).f \Rightarrow (e_{1}.f) \oplus (e_{2}.f)$ </latex>
  - <latex> $(D:e_{1})\oplus e_{2} \Rightarrow D:(e_{1} \oplus e_{2})$</latex>
  - <latex> $e_{1}\oplus (D: e_{2}) \Rightarrow D:(e_{1} \oplus e_{2})$</latex>
  - <latex> $(e\dot f_{1}). f_{2} \Rightarrow e . f$, where $f = f_{1} o f_{2}$</latex>
  - <latex> $D_{1}:(D_{2}:e) \Rightarrow D:e$, where $D=D_{1} \cap D_{2}$ </latex>
  - <latex> $(D:e). f \Rightarrow D':e$, where $D' = f^{-1}(D)$</latex>
========
====Example====
Here we present an example and explain how the normalization rules work.
<sxh ab; gutter:true>
affine RestrictExpr {N | N > 1}
given
	int A {i | 0 <= i < 3N};
returns
	int C {i | 0 <= i < N};
	int D {i, j| 0 <= i < N && 0 <= j < N};
through
	C[i] = {i| 0 <= i < N}: ({i|0 <= i < 2N}:A[i]);
	D[i,j] = (i, j -> j, i)@({i,j|0 <= i < N}:A[i]);
.
</sxh>
In the above example, C simply copies the first N values of A, and D[i,j] = A[i]. Based on analysis, the normalization can be applied with the following code:
<sxh cs; gutter:true>
prog = ReadAlphabets("IdentityFunc.ab");
Normalize(prog);
</sxh>
The above code reads the program "IdentityFunc.ab" using command ReadAlphabets and applies normalization on the program.
The following normalization rules can be applied to the program:
  * In the computation for C, expression A[i] is equivalent to A.(i %%->%% i), f is an identity function, rule number one is satisfied. So A.(i %%->%% i) %%=>%% A.
  * In the computation for C, expression {i| 0 %%<=%% i < N}: ({i|0 %%<=%% i < 2N}:A[i]) matches rule number 6, where D1 = {i| 0 %%<=%% i < N}, D2={i|0 %%<=%% i < 2N}. D=D1 ∩ D1 ={i|0 %%<=%% i < N}, the expression is changed to {i|0 %%<=%% i < N}:A.
  * In the computation for D, expression (i, j %%->%% j, i)@({|0 %%<=%% i < N\}:A[i]) matches rule number 7, where D = {i,j |0 %%<=%% i < N }, f=(i, j %%->%% j, i). D'=f^(-1)(D)={i,j|0 %%<=%% j < N}, the expression is changed to {i,j|0 %%<=%% j < N}:A[i,j];

The result for the above program after normalization is:
<sxh ab; gutter:true>
affine RestrictExpr {N | N > 1}
given
	int A {i | 0 <= i < 3N};
returns
	int C {i | 0 <= i < N};
	int D {i, j| 0 <= i < N && 0 <= j < N};
through
C = {i| 0 <= i < N}:A;
D = {i,j| 0 <= j < N} : A[i,j];
</sxh>
=======
==== More Example ====
Here we give an example about Fibonacci:
<sxh ab; gutter:true>
affine Fib {N | N > 1}
given
returns
	int f;
using
	int fib {i | i >= 0 && -i >= -N};
through
	fib =case
	     {i |i <= 1}: 1;
	     {i |i >= 2}: (i -> i-1)@(case
					{i |i <= 1}: 1;
					{i |i >= 2}: (i -> i-1)@fib + (i -> i-2)@fib;
				     esac)
		          + (i -> i-2)@(case
					{i |i <= 1}: 1;
					{i |i >= 2}: (i -> i-1)@fib + (i -> i-2)@fib;
			               esac);
	     esac;
	f = (->N)@fib;
.
</sxh>
In this example, the variable fib in the definition is substituted by its definition, which makes the program looks complicated. We do normalization on the above program with the following commands:
<sxh cs; gutter:true>
prog = ReadAlphabets("Fib.ab");
Normalize(prog);
</sxh>
The result program after normalization is 
<sxh ab; gutter:true>
affine Fib {N | N > 1}
given
returns
	int f;
using
	int fib {i | i >= 0 && -i >= -N};
through
fib = case
      {i|-i+1>= 0} : (i->)@1;
      {i|i-2== 0} : ((i->)@1 + (i->)@1);
      {i|i-3== 0} : (((i->i-2)@fib + (i->i-3)@fib) + (i->)@1);
      {i|i-4>= 0} : (((i->i-2)@fib + (i->i-3)@fib) + ((i->i-3)@fib + (i->i-4)@fib));
      esac;
f = (->N)@fib;
.
</sxh>
It is clear that the normalized program is much easier to read and understand.
AlphaZ

User Tools

Site Tools

Page Tools
